The solution to the problem of production with the waste paper baler
The direct factor that affects the production efficiency of the waste paper baler is the type of packing. Different types have different output values, and different standards directly determine the production efficiency of the packing machine.
The production of the horizontal waste paper baler also depends on the function of the oil cylinder of the packing machine, and the quality of the hydraulic oil used in the packing machine directly determines the stability of the packing machine.
The quality of the hydraulic oil selected for the packing machine directly determines whether the oil cylinder can exert its effectiveness, and also directly affects the failure rate and service life of the oil cylinder. It is necessary to use high-quality wear-resistant hydraulic oil to ensure the production of the packing machine.
Adjustment method for the horizontal waste paper baler
Adjustment of the heating head temperature of the horizontal waste paper baler
The temperature of the heating head has a great influence on the quality of the joint. To ensure that the polypropylene bundling belt joint is firmly bonded, the knob is generally placed at the 3-5 position. Whether the heating head temperature is appropriate can be checked by the bonding state of the heating head surface. If the surface of the heating head has white marks, the temperature is too high; if the surface of the heating head is wet, the temperature is insufficient.
Adjustment of the length of the feeding belt
The length of the feeding belt is determined by the feeding belt length adjuster on the front panel. If the belt is too short, it is easy to catch the hand. At this time, the horizontal waste paper baler can use the hand to grab the belt head and pull the belt out along the direction of the feeding belt. But the length of the feeding belt needs to be adjusted again to ensure the normal progress of the next bundling. If the belt is too long, it is not easy to align, and the loose belt is easy to wrap together, causing the belt to be misaligned or broken after the horizontal waste paper baler is packed.
Adjustment of the tightness of the bundled object of the horizontal waste paper baler
Open the table panel, loosen the inner hexagon screw on the large nut, and tighten it clockwise and loosen it counterclockwise. After the bundling force is moderate, tighten the inner hexagon screw to complete the adjustment.
Adjustment of the width of the belt and the joint when the width of the belt is uneven or when another width of the belt is replaced, it is necessary to adjust the left and right insertion slots. If the insertion slot is too narrow, it is difficult to insert the belt; if it is too wide, the joint of the bundled object may not be aligned after the horizontal waste paper baler is packed.
Before XTPACK became the leading manufacturer in the strapping machine industry, we established a well-equipped factory many years ago. The compact quality control system is reflected not only in the inspection of parts and finished products, but also in process control. Detailed work instructions have been posted at each workstation. Manufacturing and inspection records will be kept for a long time. Each strapping machine will be certified after a series of warm-up runs and checks before being sent to customers. Welcome to inquire!
